MPE/iX Error Messages Manual Vol 2 (32650-90879)

Chapter 7 263
Volume II Chapter 5
VOLUTIL and DISCUTIL
ACTION CAUSE indicates appropriate action.
85 MESSAGE *Error: User volumes incomplete, cannot use
as repair source. (volutil 85)
CAUSE The JOINMIRRSET command with SOURCE=USER was
specified, and one or more user volumes are missing.
ACTION CAUSE indicates appropriate action.
86 MESSAGE *Error: Backup volumes incomplete, cannot use
as repair source. (volutil 86)
CAUSE The JOINMIRRSET command with SOURCE=BACKUP
was specified, and one or more backup volumes are
missing.
ACTION CAUSE indicates appropriate action.
87 MESSAGE *Error: Volume set close failed during join.
(volutil 87)
CAUSE SOURCE=BACKUPwas specified for the join and it failed.
One of the reasons could be that users are still logged onto
the destination volume set. The JOINMIRRSET command
with SOURCE=BACKUP was specified, and one or more
backup volumes are missing.
ACTION Log off all users from the volume set and retry the
JOINMIRRSET. If SOURCE=USER was specified and this
message is seen, a split-volume backup is taking place on
the backup volumes.
88 MESSAGE *Error: New volumes cannot be added to a
split volume set. (volutil 88)
CAUSE The NEWVOL command was used to attempt to add
volumes to a split-volume set.
ACTION CAUSE indicates appropriate action.
89 MESSAGE *Error: Mirrored partner is already in
suspend mirror state. (volutil 89)
CAUSE A SUSPENDMIRRVOL command was issued against a
volume whose partner is in the SUSPENDMIRR state.
ACTION CAUSE indicates appropriate action.
122 MESSAGE *Error: Volume mounted in invalid state for
desiredoperation. (volutil 122)
CAUSE When you entered the INITVOL command, you specified a
value for the state parameter which is not valid.
ACTION CAUSE indicates appropriate action.
130 MESSAGE *Error: Error encountered while reading first
file label. (volutil 130)