MPE/iX Error Messages Manual Vol 2 (32650-90879)

Chapter 7 261
Volume II Chapter 5
VOLUTIL and DISCUTIL
20 MESSAGE *Error: Invalid command edit operation.
(shell 20)
volutil
53 MESSAGE *Error: Volume already exists. (volutil 53)
CAUSE When you entered the NEWVOL command, you specified a
volume name that already exists.
ACTION Use the DSET command to examine the names and
characteristics of all the volumes currently on the system.
Then reenter the NEWVOL command and specify a
volume name that does not exist for the current volume
set.
54 MESSAGE *Error: Volume does not exist. (volutil 54)
CAUSE When you entered the INITVOL command, you specified a
volume name associated with a particular volume set, but
a volume of that name does not exist.
ACTION Use the SHOWSET command to examine the names of all
volumes in the current volume set. Then reenter the
INITVOL command and specify a volume name that does
exist in the current volume set.
70 MESSAGE *Error: Ldev is not a valid disk type for
mirroring (volutil 70)
CAUSE Mirrored disks are not the correct type (HP7937FL) for
volume initialization.
ACTION Use correct disk type.
71 MESSAGE *Error: Mirrored volumes must be specified as
a pair. (volutil 71)
CAUSE Only one volume was specified in NEWMIRRSET or
NEWMIRRVOL.
ACTION Specify correct number of disks.
72 MESSAGE *Error: Mirrored volumes must be unique.
(volutil 72)
CAUSE LDEV's specified a duplicate number.
ACTION Specify a unique LDEV.
73 MESSAGE *Error: Cannot add mirrored volumes to
non-mirrored volume set. (volutil 73)
CAUSE Mirrored volumes cannot be added to a non-mirrored
volume set.
ACTION Specify a mirrored volume set.
74 MESSAGE *Error: Cannot add non-mirrored volumes to a