MPE/iX Error Messages Manual Vol 2 (32650-90879)

Chapter 7 257
Volume II Chapter 5
VolumeManagement
ACTION Check the error stack for your process to determine the
exact error and call your HP Support Representative for
assistance.
183 MESSAGE HPVOLINFO RECEIVED A DISC ACCESS ERROR.
(VLMERR 183)
CAUSE HPVOLINFO received a disc access error.
ACTION Check the error stack for your process to determine the
exact error and call your HP Support Representative for
assistance.
184 MESSAGE THE VOLUME SPECIFIED HAS A MIRRORED PARTNER
THAT HAS BEEN DECLAIRED DISABLED.(VLMERR 184)
CAUSE The system is unable to access the specified volume
because it has a mirrored pair that is declaired disabled.
ACTION Run the VOLUTIL utility. Once inside,repair the mirrored
partner of the volume specified. When the mirrored pair is
repaired, retry the call to HPVOLINFO.
185 MESSAGE THE VOLUME SET SPECIFIED IS NOT A VOLUME SET
ON THE SYSTEM.(VLMERR 185)
CAUSE The volume set in the volume specifier does not exist on
the system.
ACTION Use the command DSTAT ALL to obtain a list of the
volume sets that are in use on the system, then use one of
these names in the volume specifier being passed to
HPVOLINFO.
186 MESSAGE THE VOLUME CLASS SPECIFIED DOES NOT EXIST FOR
THE GIVEN
VOLUME SET.(VLMERR 186)
CAUSE The volume class name in the volume specifier does not
exist for the given volume set.
ACTION Run the VOLUTIL utility. Once inside, do the SHOWSET
command, selecting the class information, for the volume
set you want to receive information on. Use one of the
class names returned by VOLUTIL for the volume class
part of the volume specifier.
187 MESSAGE THE MEMBER VOLUME IS NOT PRESENT IN THE GIVEN
VOLUME SET.(VLMERR 187)
CAUSE The volume name in the volume specifier is not a member
of the given volume set.
ACTION Use the command DSTAT ALL to obtain a list of the
volume names and the volume sets that they belong to on
the system. Use one of these names for the volume name
in the volume specifier.