MPE/iX Error Messages Manual Vol 2 (32650-90879)

248 Chapter7
Volume II Chapter 5
UPS
system software, or a system memory error.
ACTION Call your Hewlett-Packard service representative.
590 MESSAGE UPS Monitor error: UPS Monitor process
initialization failed due to error in
obtaining resources (data object, message
port, etc.). (UPSERR 0590)
CAUSE This is a software-detected error condition that indicates
an error in the UPS Monitor software or in some other
system software, or a system memory error.
ACTION Call your Hewlett-Packard service representative.
591 MESSAGE UPS Monitor warning: UPS Monitor finds no UPS
devices configured in the system I/O
configuration files. UPS Monitor is
terminating itself. (UPSWRN 0591)
CAUSE No UPSs have been configured in the system's I/O
configuration files. This is an error if this system is
supposed to have UPSs on it. This is not an error if this
system is not supposed to have UPS devices on it.
ACTION If this system is supposed to have UPS devices on it, then
review and correct the system I/O configuration, and then
restart the system. If this system is not supposed to have
UPS devices on it, then no action is needed.
592 MESSAGE UPS Monitor system call error: Error status !
(Subsystem # !, Error # !) received from
procedure Get_Ups_Devices_Count. (UPSERR
0592)
CAUSE This is a software-detected error condition that indicates
an error occurred in a call to the specified MPE/iX
Operating System procedure when that procedure was
called by the UPS Monitor software.
ACTION Call your Hewlett-Packard service representative.
593 MESSAGE UPS LDEV ! initialization error: UPS Monitor
was unable to locate this UPS LDEV via the
File System's "Device Files" facility.
(UPSERR 0593)
CAUSE This is a software-detected error condition that indicates
an error in the UPS Monitor software or in some other
system software, or a system memory error.
ACTION Call your Hewlett-Packard service representative.
594 MESSAGE UPS Monitor logic error: Attempted to do
status character mapping (table lookup) of an
unknown/undefined UPS status character.