Manualshelf

MPE/iX Error Messages Manual Vol 2 (32650-90879)

ManualsBrandsHP ManualsSoftwareMPE/iX 6.0 Operating System
231232233234235236237238239240
Chapter 7 233
Volume II Chapter 5
UPS
system software, or a system memory error.
ACTION Call your Hewlett-Packard service representative.
514 MESSAGE UPS Monitor logic error: Attempted to map an
invalid UPS alarm status condition. (UPSERR
0514)
CAUSE This is a software-detected error condition that indicates
an error in the UPS Monitor software or in some other
system software, or a system memory error.
ACTION Call your Hewlett-Packard service representative.
515 MESSAGE UPS Monitor logic error: Attempted to map an
invalid UPS status kind. (UPSERR 0515)
CAUSE This is a software-detected error condition that indicates
an error in the UPS Monitor software or in some other
system software, or a system memory error.
ACTION Call your Hewlett-Packard service representative.
516 MESSAGE UPS Monitor system call error: Error status !
(Subsystem # !, Error # !) received from
procedure Receive_Msg. (UPSERR 0516)
CAUSE This is a software-detected error condition that indicates
an error occurred in a call to the specified MPE/iX
Operating System procedure when that procedure was
called by the UPS Monitor software.
ACTION Call your Hewlett-Packard service representative.
517 MESSAGE UPS Monitor system call error: Error status !
(Subsystem # !, Error # !) received from
procedure Sendio. (UPSERR 0517)
CAUSE This is a software-detected error condition that indicates
an error occurred in a call to the specified MPE/iX
Operating System procedure when that procedure was
called by the UPS Monitor software.
ACTION Call your Hewlett-Packard service representative.
518 MESSAGE UPS Monitor logic error: Invalid UID in UPS
Table Entry when starting next UPS I/O
request. (UPSERR 0518)
CAUSE This is a software-detected error condition that indicates
an error in the UPS Monitor software or in some other
system software, or a system memory error.
ACTION Call your Hewlett-Packard service representative.
519 MESSAGE UPS Monitor logic error: Invalid UPS Number
in UPS Table Entry when starting next UPS I/O
request. (UPSERR 0519)