MPE/iX Error Messages Manual Vol 2 (32650-90879)

218 Chapter6
Volume II Chapter 5
Threshold Manager
(THMGRERR 324)
CAUSE Cannot find the command to provide help.
ACTION Use the HELP summary to identify which command it
should be and enter the command again. The HELP
summary is accessed by issuing the command HELP
without arguments.
328 MESSAGE *Error: Out of Heap space. (THMGRERR 328)
CAUSE Cannot get the additional space necessary to execute.
ACTION Run the program again specifying a larger NMHEAP size.
330 MESSAGE Security violation. (THMGRERR 330)
CAUSE The user does not have the privilege level necessary to
execute this command.
ACTION Obtain the necessary privilege level and try again.
331 MESSAGE Failed to open exclusively. (THMGRERR 331)
CAUSE This program is being accessed by someone else at this
time.
ACTION Wait until the program is available for exclusive access.
333 MESSAGE Cannot deallocate space. (THMGRERR 333)
CAUSE An internal error occurred which will not allow the
program to deallocate space.
ACTION Try the command again.
334 MESSAGE Failed to get the run parameter. (THMGRERR
334)
CAUSE The program failed on access of the ";PARM=" argument of
the RUN command.
ACTION Try the command again. Use the CI HELP facility for the
RUN command.
335 MESSAGE HPMYPROGAM failed. (THMGRERR 335)
CAUSE The program call to HPMYPROGRAM intrinsic to get the
program's name failed.
ACTION Exit the program and try again.
336 MESSAGE Trying to open the program a second time.
(THMGRERR 336)
CAUSE More than one access to the program is not allowed.
ACTION Wait until the program is available for exclusive access.
337 MESSAGE Only one user is allowed to configure
thresholds. (THMGRERR 337)