MPE/iX Error Messages Manual Vol 2 (32650-90879)

170 Chapter5
Volume II Chapter 4
System Aborts
2402 MESSAGE PREP_CM_SERVER can not copy the message into
a message frame from the target port's pool.
2403 MESSAGE PREP_CM_SERVER encountered an unexpected
escape from SWITCH.
2404 MESSAGE The message threshold of the target port can
not be changed; bad status from PORT_CONTROL.
2405 MESSAGE Creation of CM_PORT failed.
2406 MESSAGE An unexpected escape was encountered in
CREATE_CM_SVR.
2407 MESSAGE Creation of a PFP port was unsuccessful.
2409 MESSAGE CREATE_PORT_DST can not create CONTEXT AREA
TABLE for the DST.
2410 MESSAGE CREATE_PORT_DST can not create the message
pool for the DST.
2411 MESSAGE CREATE_PORT_DST can not release the data
segment while recovering from an error.
2412 MESSAGE CREATE_PORT_DST can not release the port DST
extension area while recovering from an
error.
2413 MESSAGE DISCARD_REF can not release the caller's
message frame.
2414 MESSAGE GET_MSG_REF can not locate the port's DST.
2415 MESSAGE GET_MSG_REF can not get message frame from
the port's message pool.
2416 MESSAGE GET_MSG_REF_NW can not locate the port's DST.
2417 MESSAGE GET_MSG_REF_NW can not get a message frame
from the port's message pool.
2418 MESSAGE KILL_PFP_CM got an unexpected error from
KILL_PFP.
2419 MESSAGE The type of information requested by the
caller is unknown to NEW_PORT_STATUS.
2420 MESSAGE NEW_PORT_STATUS can not locate the caller's
DST.
2421 MESSAGE NEW_PORT_STATUS encountered an unexpected
escape.
2422 MESSAGE NO_CHK_SEND_DB can not send a message to the
target port.
2423 MESSAGE NO_CHK_SEND_Q can not send message to the
target port.