MPE/iX Error Messages Manual Vol 2 (32650-90879)

146 Chapter4
Volume II Chapter 4
System Aborts
not ALIVE.
1460 MESSAGE We are terminating a process whose state is
not ALIVE.
1461 MESSAGE We continued to execute in TERMINATE_PROCESS
after giving up the CPU.
1462 MESSAGE While the system is booting, we were unable
to obtain a pointer to the PCB TABLE
(CONVERT_DST).
1463 MESSAGE While the system was booting, we were unable
to initialize the port for the BOOT process
(SETUP_PORTS).
1464 MESSAGE While the system was booting, a release
object failed on the temporary PIB for the
BOOT process (RELEASE_OBJECT).
1465 MESSAGE While the system was booting, we were unable
to allocate a process ID for the BOOT process
(ALLOCATE_PID).
1466 MESSAGE While the system was booting, we were unable
to schedule the BOOT process for execution
(NOTIFY_DISPATCHER).
1467 MESSAGE While the system was booting, we were unable
to allocate space in BANK 0 for the PCB TABLE
(ALLOC_B0_SUB_OBJECT).
1468 MESSAGE While the system was booting, we were unable
to get a long pointer to the PCB TABLE
(CONVERT_DST).
1469 MESSAGE While the system was booting, we were unable
to create the PCB TABLE within the PCB
SUB-OBJECT (CREATE_TABLE).
1470 MESSAGE While the system was booting, we were unable
to CREATE the PIB TABLE.
1471 MESSAGE While the system was booting, we were unable
to allocate a data segment for the
PROCESS/JOB CROSS REFERENCE TABLE
(ALLOCATE_DST).
1472 MESSAGE While the system was booting, we were unable
to obtain a pointer for the PROCESS/JOB CROSS
REFERENCE TABLE (CONVERT_DST).
1473 MESSAGE While the system was booting, we were unable
to create the PROCESS ID LIST (CREATE_TABLE).
1474 MESSAGE While the system was booting, we were unable
to create the PROTECT ID LIST (CREATE_TABLE).