MPE/iX Error Messages Manual Vol 2 (32650-90879)

Chapter 4 123
Volume II Chapter 4
System Aborts
713 MESSAGE At process termination time (DEMOLISH_PORT),
an error from TABLE MANAGEMENT occurred when
releasing the standard ports entry to the
table.
714 MESSAGE The procedure DELETE_PORT_BASE can not
release the semaphore port; bad status from
RECEIVE_FROM_SEMAPHORE_PORT.
715 MESSAGE The procedure DELETE_PORT_ACCESS is still
holding the semaphore port after release.
716 MESSAGE The procedure LOSE_PORT can not flush waiting
process from the specified wait queue of the
semaphore port being purged; bad status from
REPLY_TO_WAITER.
717 MESSAGE The procedure CHANGE_OWNERSHIP corrupted the
port ownership list; port's ownership
information inconsistent with PIB's.
718 MESSAGE The procedure CHANGE_OWNERSHIP detected a
corrupted port ownership list; port's
ownership information does not agree with
PIB's.
719 MESSAGE Various procedures caused an unexpected
status from PREP_PORT.
720 MESSAGE The procedure DEC_PFP_COUNT detected an error
accessing PFP upon CREATE_PORT error; can not
decrement PFP's use count.
721 MESSAGE The procedure LOCATE_PORT_ENTRY can not read
port directory entry; bad status from
STREADKEY.
722 MESSAGE The procedures FAST_RELEASE_MSG_FRAME,
SEND_MSG,
REL_MSG_FRAME,DO_SERVER(SCHEDULE_SERVER), and
RELEASE_FRAME cannot release message frame;
bad status from RELEASE_TABLE_ENTRY.
723 MESSAGE The procedures FAST_CONTINUE_SERVER_IN_PFP
and FAST_EXECUTE_SERVER_IN_PFP can not send
message to PFP port.
724 MESSAGE There is a problem with the message frame in
the GPO cache.
725 MESSAGE The port's server caused an unexpected
escape.
726 MESSAGE The procedure INTERNAL_SEND can not get
message frame for internal send.