MPE/iX Error Messages Manual Vol 2 (32650-90879)

118 Chapter4
Volume II Chapter 4
System Aborts
CAUSE CLEAN_CM_DEVICE_TABLES could not SWITCH to
CM.
127 MESSAGE The procedure INIT_CM_DEVICE_TABLES is unable
to SWITCH to CM.
CAUSE INIT_CM_DEVICE could not SWITCH to CM.
128 MESSAGE The procedure IO_INIT failed to initialize
the low level I/O system.
CAUSE The low level I/O system was not initialized.
450 MESSAGE Activation of JOBMAIN process failed.
451 MESSAGE Activation of SESSIONMAIN process failed.
452 MESSAGE Creation of JOBMAIN process failed.
453 MESSAGE Creation of JOBMAIN_PORT failed.
454 MESSAGE Creation of JOBQUEUE_PORT failed.
455 MESSAGE Creation of SESSIONMAIN process failed.
456 MESSAGE Creation of SESSIONMAIN_PORT process failed.
457 MESSAGE Opening JOBMAIN_PORT process failed.
458 MESSAGE Opening JOBQUE_PORT process failed.
459 MESSAGE Opening SESSIONMAIN_PORT process failed.
460 MESSAGE The information and subsystem escape is
passed as the second parameter.
461 MESSAGE Had an unexpected escape from the operating
system to the SESSIONMAIN outerblock. The
information and subsystem that escaped are
passed to the system abort as the second
parameter.
462 MESSAGE Had an unexpected escape from the operating
system to the JSMAIN outerblock.
463 MESSAGE Port status is passed as the second
parameter.
464 MESSAGE Port status is passed as the second
parameter.
465 MESSAGE Port status is passed as the second
parameter.
500 MESSAGE Management failed to post data from memory to
disk.
CAUSE DSM attempted to post 16 pages with the MAKE_ROC
option after a sequential read. The exact conditions that
caused an error to be returned are unknown to the DSM.