MPE/iX Error Messages Manual Vol 2 (32650-90879)

Chapter 4 115
Volume II Chapter 4
System Aborts
restarted. If the failure occurred on the final, or only reel
of tape, the current dump may be valid.
77 MESSAGE FORCE_WRITE end of file to dump device
failed.
CAUSE I/O code returned a tape error.
ACTION Call your support representative. The dump may be
restarted.
78 MESSAGE SENDIO to FORCE_WRITE to dump device failed.
CAUSE I/O code returned a tape error.
ACTION Call your support representative. The dump may be
restarted.
79 MESSAGE WRITE end of file to dump device failed.
CAUSE I/O code returned a tape error.
ACTION Call your support representative. The dump may be
restarted.
80 MESSAGE SENDIO to READ from dump device failed.
CAUSE A non-recoverable tape READ error occurred.
ACTION Call your support representative. The dump may be
restarted.
81 MESSAGE SENDIO to WRITE to dump device failed.
CAUSE A non-recoverable tape WRITE error occurred.
82 MESSAGE SENDIO for tape GET_DEVICE_STATUS failed.
CAUSE I/O code returned error trying to get tape device status;
did not occur during tape READ or WRITE.
ACTION Call your support representative. The dump may be
restarted.
100 MESSAGE The procedure BUILD_DIAGMON_PORT failed to
build the diagnostic monitor port.
CAUSE Failed when calling BUILD_DIAGMON_PORT to build
diagnostic monitor port.
101 MESSAGE The procedure LOAD_SYSTEM_SL failed to load
the system SL.
CAUSE System SL was not loaded by the LOAD_SYSTEM_SL
procedure.
102 MESSAGE The procedure INITIALIZE_DISPATCHER failed to
initialize the DISPATCHER.
CAUSE DISPATCHER was not initialized.
103 MESSAGE The procedure SM_CREATE_HASH_TBL failed to