MPE/iX Error Messages Manual Vol 2 (32650-90879)

114 Chapter4
Volume II Chapter 4
System Aborts
I/O environment.
54 MESSAGE An error occurred in CONFIGURE_DEVICE (halt;
not system abort).
CAUSE Problem occurred configuring console (will appear in front
panel message - halt).
55 MESSAGE An error occurred in CONFIGURE_DEVICE.
CAUSE Problem occurred configuring device other than the
console.
70 MESSAGE SENDIO to read from SYSDISC failed.
CAUSE I/O code returned a disk error.
ACTION Call your support representative. The dump may be
restarted.
71 MESSAGE RENDEZVOUSIO to read from SYSDISC failed.
CAUSE I/O returned a disk error.
ACTION Call your support representative. The dump may be
restarted.
72 MESSAGE SENDIO to READ from disk failed.
CAUSE I/O code returned a disk error.
ACTION Call your support representative. The dump may be
restarted.
73 MESSAGE REWIND_TAPE_ONLINE of dump device failed.
CAUSE I/O code returned a tape error.
ACTION Call your support representative. The dump may be
restarted.
74 MESSAGE RENDEZVOUSIO returned error on rewind tape
online.
CAUSE I/O code returned a tape error.
ACTION Call your support representative. The dump may be
restarted.
75 MESSAGE REWIND_TAPE of dump device failed.
CAUSE I/O code returned a tape error.
ACTION Call your support representative. A dump may be
restarted. If the failure occurred on the final, or only reel
of tape, the current dump may be valid.
76 MESSAGE RENDEZVOUSIO returned error on REWIND_TAPE.
CAUSE I/O code returned a tape error.
ACTION Call your support representative. The dump may be