MPE/iX Error Messages Manual Vol 1 (32650-90878)

Chapter 2 95
Command Interpreter
(CIERR)
ACTION Check the command syntax and reenter the command
(make sure the tape file name is included).
1006 MESSAGE SEMICOLON REQUIRED BETWEEN KEYWORDS. (CIERR
1006)
CAUSE A semicolon (;) is required to separate keywords.
ACTION Reenter the command making sure the keywords are
separated with semicolons.
1007 MESSAGE "FILES=" REDUNDANTLY SPECIFIED. LAST USED.
(CIWARN 1007)
CAUSE The "FILES=" parameter was specified more than once.
ACTION None. The last "FILES=" parameter was used.
1008 MESSAGE EXPECTED "FILES=". (CIERR 1008)
CAUSE The "FILES=" parameter was missing from the command
entry.
ACTION Reenter the command making sure the "FILES="
parameter is included.
1009 MESSAGE EXPECTED FILE COUNT LIMIT BETWEEN 1 AND
2147483647. (CIERR 1009)
CAUSE The file count limit entered was less than 1 or greater than
2,147,483,647.
ACTION Reenter the command making sure the file count limit is
within the range of 1 to 2,147,483,647.
1010 MESSAGE EXPECTED ONE OF "SHOW", "FILES", OR "DATE".
(CIERR 1010)
CAUSE Same as message content.
ACTION Check the syntax and reenter the command.
1011 MESSAGE MORE THAN ! PARAMETERS TO STORE COMMAND.
(CIERR 1011)
CAUSE Too many parameters were specified with the command
entry.
ACTION Check the syntax and reenter the command.
1012 MESSAGE A TAPE FILE NAME IS REQUIRED. (CIERR 1012)
CAUSE A tape file name was not entered with the command.
ACTION Reenter the command making sure a tape file name is
included.
1013 MESSAGE UNEXPECTED "=" WHILE PARSING FILE SET NAMES.
(CIERR 1013)
CAUSE Syntax error.