MPE/iX Error Messages Manual Vol 1 (32650-90878)

Chapter 2 35
Command Interpreter
(CIERR)
CAUSE You have specified an unacceptable volume type; the type
must be either ANS or IBM.
ACTION Reenter the command, specifying an appropriate volume
type. To review the command syntax, invoke the online
Help Facility or refer to the MPE/iX Commands Reference
Manual.
291 MESSAGE EXPECTED "NEXT", "ADDF" OR A FOUR DIGIT
NUMBER AS THE SEQUENCE FIELD. (CIERR 291)
CAUSE You have entered something that the system does not
recognize as an acceptable sequence specification. The
system expected NEXT, ADDF, or a number.
ACTION Reenter the command, specifying an appropriate
sequence. To review the command syntax, invoke the
online Help Facility or refer to the MPE/iX Commands
Reference Manual.
292 MESSAGE EXTRANEOUS PARAMETER TO THE LABEL KEYWORD.
(CIERR 292)
CAUSE You have entered something that the system does not
recognize in the LABEL parameter.
ACTION Check for syntax or spelling errors and reenter the
command. For more information about the command
syntax, invoke the online Help Facility or refer to the
MPE/iX Commands Reference Manual.
293 MESSAGE FORMS MESSAGE REDUNDANTLY SPECIFIED. LAST
MESSAGE USED. (CIERR 293)
CAUSE You have included more than one forms message in your
command line; the system is warning you that it is using
the last one named.
ACTION If you do not wish the system to use the last one named in
your command line, reenter the command, omitting the
redundancy.
294 MESSAGE FORMS MESSAGE MUST BE TERMINATED WITH A
PERIOD. (CIERR 294)
CAUSE You have left off a closing period in your forms message.
ACTION Reenter the command, adding a period at the end of the
forms message.
295 MESSAGE FORMS MESSAGE TRUNCATED TO 49 CHARACTERS.
(CIWARN 295)
CAUSE Your forms message was longer than the 49 characters
allowed; the system has deleted all characters after the
49th.
ACTION If you do not want those characters deleted, reenter the