MPE/iX Error Messages Manual Vol 1 (32650-90878)

Chapter 2 27
Command Interpreter
(CIERR)
247 MESSAGE ACCESS SYNTAX IS ACCESS = access type. NO
OTHER PARAMETERS ALLOWED. (CIERR 247)
CAUSE You have entered something that the system does not
recognize.
ACTION To review the command syntax, invoke the online Help
Facility or refer to the MPE/iX Commands Reference
Manual; then reenter the command, specifying the
appropriate access type.
248 MESSAGE BUF PARAMETER OVERRIDES PREVIOUS NOBUF.
(CIWARN 248)
CAUSE You have specified BUF and the system is warning you
that your specification of NOBUF earlier in the command
line is being overridden.
ACTION No action is required, unless you actually want to specify
NOBUF rather than BUF, in which case you must reenter
the command, omitting the BUF specification.
249 MESSAGE BUF PARAMETER OVERRIDES PREVIOUS BUF
PARAMETER. (CIWARN 249)
CAUSE You have included more than one BUF parameter in your
command line; the system is warning you that it is using
the last one named.
ACTION If you do not wish the system to use the last BUF
parameter named in your command line, reenter the
command, omitting the redundancy.
250 MESSAGE EXPECTED INTEGER BETWEEN 0 AND 16 AS NUMBER
OF BUFFERS. (CIERR 250)
CAUSE You failed to enter an acceptable number of buffers.
ACTION You must specify a positive number between 0 and 16 to
indicate the number of buffers.
251 MESSAGE EXTRANEOUS PARAMETER. THE SYNTAX IS
BUF=number of buffers. (CIERR 251)
CAUSE You have entered something that the system does not
recognize. The system expects you to specify the number of
buffers using the syntax BUF=number
ACTION To review the command syntax, invoke the online Help
Facility or refer to the MPE/iX Commands Reference
Manual; then reenter the command following the required
syntax.
252 MESSAGE FILE CODE OVERRIDES PREVIOUS FILE CODE.
(CIWARN 252)
CAUSE You have included more than one file code in your
command line; the system is warning you that it is using