MPE/iX Error Messages Manual Vol 1 (32650-90878)

244 Chapter3
Command Interpreter
(CIERR) 1901-12256
ACTION Reenter the command and make sure the integer used for
the logical device is a valid number.
7012 MESSAGE EXPECTED INTEGER SPECIFYING LDEV. (CIERR
7012)
CAUSE The value specified for the logical device was not an
integer.
ACTION Reenter the command and make sure the value specified
for the logical device is an integer.
7013 MESSAGE INVALID JOB TYPE, EXPECT 1 OR 2. (CIERR 7013)
CAUSE An invalid value for the job type was entered.
ACTION Reenter the command and make sure the value entered for
the job type is a 1 or a 2.
7014 MESSAGE PROCESS ABORTED BEFORE LOGGING ON. (CIERR
7014)
CAUSE The process was aborted before logging on.
7015 MESSAGE SESSION LIMIT EXCEEDED, SESSION DIDN'T LOG
ON. (CIERR 7015)
CAUSE The maximum number of sessions was exceeded.
ACTION Increase the maximum number of sessions allowed by
using the :LIMIT command (to use this command you
must have SM capability). Or, get someone else to log off so
that the maximum number of sessions is not exceeded.
7016 MESSAGE INPRI BELOW JOBFENCE, SESSION DIDN'T LOG ON.
(CIERR 7016)
CAUSE The input priority is set below the job fence.
7017 MESSAGE UNABLE TO OBTAIN PCB ENTRY. (CIERR 7017)
7018 MESSAGE UNABLE TO OBTAIN STACK. (CIERR 7018)
7019 MESSAGE UNABLE TO OBTAIN JIT DST. (CIERR 7019)
7020 MESSAGE UNABLE TO OBTAIN JDT DST. (CIERR 7020)
7021 MESSAGE UNABLE TO OBTAIN FILE DST. (CIERR 7021)
7022 MESSAGE UNABLE TO OBTAIN JOB PROCESS COUNT ENTRY.
(CIERR 7022)
7023 MESSAGE UNABLE TO OBTAIN ENTRY FOR OUTPUT DEVICE.
(CIERR 7023)
7024 MESSAGE UNABLE TO OBTAIN ENTRY FOR INPUT DEVICE.
(CIERR 7024)
7025 MESSAGE ERROR OCCURRED BEFORE SESSION LOGGED ON.
(CIERR 7025)