MPE/iX Error Messages Manual Vol 1 (32650-90878)

242 Chapter3
Command Interpreter
(CIERR) 1901-12256
number is used as the hours offset.
6343 MESSAGE EXPECTED A POSITIVE NUMBER SPECIFYING THE
MINUTES OFFSET. (CIERR 6343)
CAUSE A negative number was specified as the minutes offset.
ACTION Reenter the command and make sure that a positive
number is used as the minutes offset.
6355 MESSAGE SPECIFIED TIME IS EARLIER THAN OR AT THE
CURRENT TIME. JOB(S) WILL BE :STREAMED
IMMEDIATELY. (CIWARN 6355)
CAUSE The job will be streamed immediately because of the value
you specified with the ;AT, or ;DAY, or ;DATE, or ;IN
option.
ACTION If you want the job to stream at a future time and date,
you must edit the job file so that the time, day, or date
specified in the file is later than the current time, day, or
date.
7000 MESSAGE SPECIFIED DEVICE NOT WITHIN RANGE OF VALID
LDEVS. (CIERR 7000)
CAUSE The device specified was outside the range of valid logical
devices.
ACTION Use SHOWDEV to view valid ldevs. Then reenter the
command and make sure that the specified device is
within the range of valid logical devices.
7001 MESSAGE SPECIFIED DEVICE MUST NOT BE VIRTUAL. (CIERR
7001)
CAUSE The device specified is a virtual device.
ACTION Ask the system manager to use SYSGEN to determine
which ldevs are associated with actual pieces of hardware.
Then reenter the command and specify the appropriate
ldev (must NOT be a virtual device).
7002 MESSAGE SPECIFIED DEVICE MUST BE A TERMINAL. (CIERR
7002)
CAUSE The device specified in the command entry is not a
terminal.
ACTION Ask the system manager to use SYSGEN to determine
which ldevs are associated with terminals. Then reenter
the command and make sure the device specified is a
terminal.
7003 MESSAGE SPECIFIED DEVICE IS NOT FREE. (CIERR 7003)
CAUSE The device specified is not available for use.
ACTION Use SHOWDEV to see if the device is "AVAILABLE". Then