MPE/iX Error Messages Manual Vol 1 (32650-90878)

220 Chapter3
Command Interpreter
(CIERR) 1901-12256
4153 MESSAGE MISSING CRITICAL DS SOFTWARE, NO CONTROL
FUNCTIONS EXECUTED. (CIERR 4153)
CAUSE Software referenced is not located.
ACTION Check with your service representative.
4154 MESSAGE TOO MANY DS USERS ON THIS SYSTEM. CANNOT
OBTAIN A VIRTUAL PROCESS NUMBER. (CIERR 4154)
CAUSE Too many users using the system to perform task, or too
many DS lines are open.
ACTION Ask the system manager to close any open DS lines.
4180 MESSAGE REDUNDANT SPECIFICATION OF CANCEL OPTION
IGNORED. (CIWARN 4180)
CAUSE Extraneous information provided is ignored.
ACTION None; the message is for information only.
4181 MESSAGE CANCEL OPTION HAS NO PARAMETERS. (CIERR 4181)
CAUSE Extraneous parameter given.
ACTION Check syntax.
4182 MESSAGE DS DEVICE ! IS NOT AN X.21 DEVICE; CANCEL NOT
EXECUTED. (CIWARN 4182)
CAUSE Device specified is not an X.21 device. Task not executed.
ACTION None; the message is for information only.
4183 MESSAGE NO CALL REQUEST QUEUED FOR DS DEVICE !.
(CIWARN 4183)
CAUSE There are currently no call requests waiting for the device
specified.
ACTION None; the message is for information only.
4200 MESSAGE EXPECTED ONE OR MORE OF THE CONTROL
FUNCTIONS: START, TRACE, RETRIES, SIGNOFF,
KILL, CHECK, OR VERIFY. (CIERR 4200)
CAUSE Syntax error encountered.
ACTION Check syntax.
4201 MESSAGE EXCEEDED MAXIMUM NUMBER OF PARAMETERS. (CIERR
4201)
CAUSE Syntax error encountered.
ACTION Check syntax.
4202 MESSAGE START ALREADY REQUESTED. (CIWARN 4202)
CAUSE Task has already been performed.
ACTION None; the message is for information only.