MPE/iX Error Messages Manual Vol 1 (32650-90878)

Chapter 3 207
Command Interpreter
(CIERR) 1901-12256
parameter (ON or OFF).
ACTION Provide either a YES or NO.
3831 MESSAGE EXPECTED AN INTEGER: 0<=I<=255 FOR TRACE
MASK. (CIERR 3831)
CAUSE The TRACE MASK value was not an integer.
ACTION Check syntax and reenter the command using an integer
between 0 and 255, inclusive, for a TRACE MASK value.
3832 MESSAGE EXPECTED AN INTEGER: 0<=I<=248 FOR TRACE
ENTRIES. (CIERR 3832)
CAUSE The TRACE MASK value was not an integer.
ACTION Check syntax and reenter the command using an integer
between 0 and 248, inclusive, for a TRACE MASK value.
3833 MESSAGE EXPECTED "," AS TRACE PARAMETER DELIMETER.
(CIERR 3833)
CAUSE Delimiter used between parameters not accepted.
ACTION Check syntax.
3838 MESSAGE IMFCONTROL ERROR ! (CIERR 3838)
CAUSE Interactive mainframe facility control error.
ACTION Call your service representative and give the
IMFCONTROL error number that you received.
3839 MESSAGE COULD NOT OPEN FILE ! , ! (CIERR 3839)
CAUSE File referenced could not be accessed for the reason shown
in the message.
ACTION Check the file.
3840 MESSAGE EXPECTED "START","STOP","KILL",OR "TRACE".
(CIERR 3840)
CAUSE Unexpected command encountered in IMF/3000.
ACTION Check syntax.
3841 MESSAGE EXPECTED " " OR "," AFTER IMF COMMAND NAME.
(CIERR 3841)
CAUSE A missing or incorrect delimiter was encountered.
ACTION Check syntax and reenter the command correctly.
3842 MESSAGE NO BACKREFERENCE ALLOWED FOR IMF CONFIG.
FILE. (CIERR 3842)
CAUSE Unaccepted backreference encountered.
ACTION Check syntax.
3843 MESSAGE INVALID IMF CONFIGURATION FILE. (CIERR 3843)