MPE/iX Error Messages Manual Vol 1 (32650-90878)

196 Chapter3
Command Interpreter
(CIERR) 1901-12256
WELCOME command to define a welcome message.
ACTION Reenter the command providing only one parameter.
3363 MESSAGE WELCOME FILE MUST BE FIXED RECORD FORMAT.
WELCOME MESSAGE REMAINS UNCHANGED. (CIERR
3363)
CAUSE The WELCOME message file is not in fixed record format.
ACTION Alter the WELCOME message file so that it is in fixed
record format.
3364 MESSAGE WELCOME FILE MUST BE ASCII. WELCOME MESSAGE
REMAINS UNCHANGED. (CIERR 3364)
CAUSE The WELCOME message file is not in ASCII format.
ACTION Alter the WELCOME message to an ASCII format.
3365 MESSAGE WELCOME FILE RECORD SIZE IS GREATER THAN 80
CHARACTERS. LINES TRUNCATED TO 72 CHARACTERS
LONG. (CIWARN 3365)
CAUSE The length of the WELCOME message's text file lines
exceeds the maximum length that is allowed.
ACTION Alter WELCOME message file so that the length of each
line does not exceed 72 characters.
3366 MESSAGE CAN NOT OPEN WELCOME FILE. WELCOME MESSAGE
REMAINS UNCHANGED. (CIERR 3366)
CAUSE An unrecognized file name has been specified in the
WELCOME command line.
ACTION Make sure you entered the correct file name for the
WELCOME message file. Then reenter the command line
using the correct file name.
3367 MESSAGE CAN NOT READ WELCOME FILE. WELCOME MESSAGE
REMAINS UNCHANGED. (CIERR 3367)
CAUSE The file name specified in the WELCOME message command
line can not be read due to insufficient file access
priviledge.
ACTION Alter file access security.
3368 MESSAGE WELCOME MESSAGE DATA SEGMENT FULL. WELCOME
MESSAGE TRUNCATED. (CIWARN 3368)
CAUSE The space alloted to store WELCOME message text has
been exceeded. Portions of the WELCOME message may
be cut off.
ACTION If you have DS capability, you can provide extra Data
Segments. Otherwise, you'll have to shorten the message.
3370 MESSAGE EXPECT TWO PARMS - LDEV,{ENABLE/DISABLE}.