MPE/iX Error Messages Manual Vol 1 (32650-90878)

Chapter 3 191
Command Interpreter
(CIERR) 1901-12256
ACTION None. Information only.
3290 MESSAGE UNEXPECTED RIT STATUS = !. (CIERR 3290)
3291 MESSAGE REPLY REQUIRES THREE PARAMETERS. (CIERR 3291)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
3301 MESSAGE DEVICE MUST BE 2608 OR 2631 LINE PRINTER,
LDEV = !. (CIERR 3301)
3302 MESSAGE MARGIN MUST BE NUMERIC . (CIERR 3302)
3303 MESSAGE MARGIN MUST BE BETWEEN 1 AND 16. (CIERR 3303)
3304 MESSAGE TOO MANY PARAMETERS. EXPECTED MARGIN = "nn".
(CIERR 3304)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
3305 MESSAGE SETTING OF MARGIN FAILED ON LDEV !. (CIERR
3305)
3306 MESSAGE INCORRECT PARAMETER SPECIFICATION. EXPECTED
EITHER VFC FILE OR "MARGIN=<offset>". (CIERR
3306)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
3307 MESSAGE DOWNLOAD MUST HAVE AT LEAST TWO PARAMETERS.
LDEV AND FILENAME OR MARGIN. (CIERR 3307).
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
3308 MESSAGE LOGICAL DEVICE NUMBER MUST BE NUMERIC. (CIERR
3308)
3309 MESSAGE LOGICAL DEVICE NUMBER IS INVALID. (CIERR
3309)
3310 MESSAGE DEVICE MUST BE A 2608A LINE PRINTER, LDEV =
!. (CIERR 3310)
3311 MESSAGE FIRST CHARACTER IN FILE NAME MUST BE
ALPHABETIC. (CIERR 3311)
CAUSE The first character in the specified file name is not
alphabetic.
ACTION Reenter the command making sure the file name specified
is valid.
3312 MESSAGE FOPEN ERROR (!). (CIERR 3312)