MPE/iX Error Messages Manual Vol 1 (32650-90878)

178 Chapter3
Command Interpreter
(CIERR) 1901-12256
3073 MESSAGE LIMIT EXPECTS A COMMA BETWEEN PARAMETERS.
(CIERR 3073)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
3074 MESSAGE EXPECTED SESSION LIMIT BETWEEN 0 AND 32767.
(CIERR 3074)
CAUSE The session limit parameter value specified with the
LIMIT command was not within the valid range of 0 and
32,767.
ACTION Use a value between 0 and 32,767 when specifying the
session limit with the LIMIT command.
3075 MESSAGE EXPECTED JOB LIMIT BETWEEN 0 AND 32767.
(CIERR 3075)
CAUSE The job limit parameter value specified with the LIMIT
command was not within the valid range of 0 and 32,767.
ACTION Use a value between 0 and 32,767 when specifying the job
limit with the LIMIT command.
3076 MESSAGE EXPECTED ONE OF JOB NUMBER OR JOB NAME.
(CIERR 3076)
CAUSE The job number or job name was ommitted from the
command entry.
ACTION Reenter the command making sure you specify either the
job number or job name.
3077 MESSAGE DEVICE NOT OUTPUT DEVICE. (CIERR 3077)
CAUSE The logical device specified in the command is not an
output device.
ACTION Reenter the command making sure the the logical device
specified is a valid output device.
3078 MESSAGE EXPECTED JOB NUMBER IN FORM OF #Jnnn. (CIERR
3078)
CAUSE The job number was ommitted or not entered in the
correct form.
ACTION Reenter the command making sure the job number is
entered in the form #Jnnn.
3079 MESSAGE EXPECTED ONE OF #Jnnn OR #Snnn. (CIERR 3079)
CAUSE The job number or session number was ommitted or not
entered in the correct form.
ACTION Reenter the command making sure the job number or the
session number is entered in the correct form.