MPE/iX Error Messages Manual Vol 1 (32650-90878)

Chapter 3 177
Command Interpreter
(CIERR) 1901-12256
NUMBER. (CIERR 3066)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
3067 MESSAGE STREAMS DEVICE CANT BE A TERMINAL. (CIERR
3067)
CAUSE The logical device specified with the STREAMS command
is a terminal.
ACTION Any input device except the System Console or terminals
may be used with the STREAMS command, providing that
it was configured as job-accepting in the SYSGEN dialog.
3068 MESSAGE STREAMS DEVICE NOT DATA AND JOB ACCEPTING.
(CIERR 3068)
CAUSE The input device specified with the STREAMS command
was not configured as job-accepting in the SYSGEN dialog.
ACTION Any input device except the system console or terminals
may be used with the STREAMS command, providing that
it was configured as job-accepting in the SYSGEN dialog.
3069 MESSAGE CONSOLE HAS AT MOST ONE PARAMETER, THE DEVICE
NUMBER. (CIERR 3069)
CAUSE More than one parameter was specified with the
CONSOLE command.
ACTION Use the CONSOLE command without parameters to
report the current logical device number of the console, or
use with a logical device number to change the console to a
new device.
3070 MESSAGE DEVICE MUST BE JOB ACCEPTING. (CIERR 3070)
CAUSE The input device specified was not configured as
job-accepting in the SYSGEN dialog.
ACTION Any input device except the system console or terminals
may be used with the STREAMS command, providing that
it was configured as job-accepting in the SYSGEN dialog.
3071 MESSAGE EXPECTED ONE OF JOB OR SESSION LIMIT. (CIERR
3071)
CAUSE The LIMIT command was entered without parameters.
ACTION Use at least one parameter with LIMIT.
3072 MESSAGE LIMIT HAS AT MOST TWO PARAMETERS. (CIERR
3072)
CAUSE Syntax error. More than two parameters were specified
with the LIMIT command.
ACTION Check the syntax and reenter the command.