MPE/iX Error Messages Manual Vol 1 (32650-90878)

172 Chapter3
Command Interpreter
(CIERR) 1901-12256
CAUSE Same as message content.
ACTION None. Information only.
3018 MESSAGE DEVICE IN USE, DOWN PENDING (CIWARN 3018)
CAUSE Same as message content.
ACTION None. Information only.
3019 MESSAGE ABORTIO EXPECTS ONLY ONE PARAMETER. (CIERR
3019)
3020 MESSAGE NO REPLIES PENDING (CIWARN 3020)
CAUSE Same as message content.
ACTION None. Information only.
3021 MESSAGE ONE OR MORE DEVICES IN THAT DEVICE CLASS ARE
ASSOCIATED BY OTHERS. (CIERR 3021)
3022 MESSAGE DEVICE ! NOT IN DIAGNOSTICS. (CIERR 3022)
3023 MESSAGE OUTFENCE HAS 1 TO 3 PARAMETERS: PRIORITY
[;LDEV= DEVICE] (CIERR 3023)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
3024 MESSAGE EXPECTED OUTFENCE BETWEEN 1 AND 14. (CIERR
3024)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
3025 MESSAGE FENCE > 14, 14 USED. (CIWARN 3025)
CAUSE The OUTFENCE specified was greater than 14.
ACTION None. Information only.
3026 MESSAGE OUTFENCE < 1, 1 USED. (CIWARN 3026)
CAUSE The OUTFENCE specified was less than 1.
ACTION None. Information only.
3027 MESSAGE ABORTIO HAS EXACTLY ONE PARAMETER, THE DEVICE
NUMBER. (CIERR 3027)
CAUSE More than one parameter was specified with ABORTIO.
ACTION Specify only the device number when using ABORTIO.
3028 MESSAGE NO I/O TO ABORT FOR DEVICE !. (CIWARN 3028)
CAUSE There was no inout/output activity to abort on the device
specified with the ABORTIO command.
ACTION None. Information only.
3029 MESSAGE ACCEPT HAS ONLY TWO PARAMETERS. (CIERR 3029)