MPE/iX Error Messages Manual Vol 1 (32650-90878)

164 Chapter3
Command Interpreter
(CIERR) 1901-12256
IS: :SETCATALOG [udcfile1 [,udcfile2
...]][;SYSTEM][;ACCOUNT][;SHOW]
[;USER=username[.accountname]] (CIERR 2009).
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
2010 MESSAGE UNKNOWN SYNTAX. EXPECTED :SHOWCATALOG SYNTAX
IS: :SHOWCATALOG
[LISTFILE][;USER=username[.accountname]].
(CIERR 2010).
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
2011 MESSAGE UDCS NOT SET FOR TARGET USER DUE TO UNKNOWN
OPTION KEYWORD. VALID OPTIONS: HELP/NOHELP,
LIST/NOLIST, BREAK/NOBREAK, LOGON/NOLOGON.
(CIERR 2011).
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
2012 MESSAGE UDC COMMAND MUST START WITH AN ALPHABETIC
CHARACTER. UDC'S NOT SET FOR TARGETUSER.
(CIERR 2012).
CAUSE The UDC command does not start with an alphabetic
character.
ACTION Reenter the command making sure the UDC command
starts with an alphabetic character.
2013 MESSAGE UDC COMMAND NAME TOO LONG. UDC COMMAND NAME
MUST BE 1 TO 16 CHARACTERS LONG. UDC'S NOT
SET FOR TARGETUSER. (CIERR 2013).
CAUSE The UDC command name exceeded the maximum length
of 16 characters.
ACTION Reenter the command making sure the UDC command
name is within the range of 1 to 8 characters.
2021 MESSAGE CAN NOT WRITE TO SHOWCATALOG LIST FILE - !.
(CIERR 2021)
CAUSE You may have backreferenced a file that is too small to
contain the contents of the UDC, or to which you do not
have write access.
ACTION If the listfile is too small, build it again and specify a
larger size with the DISC parameter. If you do not have
write access to the listfile, specify another file to which you
do have access (or get access from the original creator of
the file.)