MPE/iX Error Messages Manual Vol 1 (32650-90878)

112 Chapter2
Command Interpreter
(CIERR)
BY DATA. (CIERR 1307)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
1308 MESSAGE PHNUM IS 1 TO 30 DIGITS AND DASHES. (CIERR
1308)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
1309 MESSAGE ! LIST CAN CONTAIN ONLY ONE ELEMENT. (CIERR
1309)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
1310 MESSAGE THE SPECIFIED LOGICAL DEVICE IS NOT OPEN.
(CIERR 1310)
CAUSE The logical device specified is not open.
ACTION Reenter the command making sure the logical device
specified is open.
1311 MESSAGE THE FIRST CHARACTER OF AN ID SEQUENCE MUST BE
A " OR A ( (CIERR 1311)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
1312 MESSAGE THE ID SEQUENCE MUST TERMINATE WITH A ).
(CIERR 1312)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
1313 MESSAGE THE ID SEQUENCE MUST TERMINATE WITH A ".
(CIERR 1313)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
1314 MESSAGE A NUMERIC ID SEQUENCE ELEMENT MUST BE 1 THRU
255 (OR 377). (CIERR 1314)
CAUSE The numeric id sequence element was not a valid value.
ACTION Reenter the command making sure the numeric id
sequence is within the range of 1 to 255 or is equal to 377.
1315 MESSAGE LINEBUF MUST BE A NUMERIC VALUE FROM 304 THRU
4096. (CIERR 1315)
CAUSE The LINEBUF value entered is not within the valid range
of 304 to 4096.