MPE/iX Commands Reference Manual (32650-90877)

Chapter 3 55
Command List I
Commands ABORT to BYE
Example
In the following example, three jobs are submitted by users, each with an INPRI value of 8.
To change the INPRI values to ensure that JOB1 runs first, JOB2 runs last, and JOB3 runs
second with LP allocated as the OUTDEV for JOB3, enter the following commands:
JOBFENCE 14
15:11/#J1/24/DEFERRED JOB INTRODUCED ON LDEV #53
15:11/#J2/25/DEFERRED JOB INTRODUCED ON LDEV #53
15:13/#J3/26/DEFERRED JOB INTRODUCED ON LDEV #53
SHOWJOB
JOBNUM STATE IPRI JIN JLIST INTRODUCED JOB NAME
#S23 EXEC 20 20 THU 2:15P OPERATOR.SYS
#J1 WAIT D 8 10S 12 THU 3:11P JOB2,OP.SYS
#J2 WAIT D 8 10S 12 THU 3:11P JOB3,SUE.PAYROLL
#J3 WAIT D 8 10S 12 THU 3:13P JOB1,JIM.ACCTG
4 JOBS:
0 INTRO
3 WAIT; INCL 3 DEFERRED
1 EXEC; INCL 1 SESSIONS
0 SUSP
JOBFENCE= 14; JLIMIT= 5; SLIMIT= 16
ALTJOB #J1;INPRI=10
ALTJOB #J3;INPRI=9;OUTDEV=LP
ALTJOB #J2;INPRI=8
JOBFENCE 6
SHOWJOB
JOBNUM STATE IPRI JIN JLIST INTRODUCED JOB NAME
#S23 EXEC 20 20 THU 2:15P OPERATOR.SYS
#J1 EXEC 10 10S 12 THU 3:13P JOB2, OP.SYS
#J3 EXEC 9 10S LP THU 3:11P JOB1,JIM.ACCTG
#J2 EXEC 8 10S 12 THU 3:11P JOB3,SUE.PAYROLL
4 JOBS:
0 INTRO
0 WAIT; INCL 0 DEFERRED
4 EXEC; INCL 1 SESSIONS
0 SUSP
JOBFENCE= 6; JLIMIT= 5; SLIMIT= 16
Related Information
Commands JOBFENCE, JOBSECURITY, LISTJOBQ
Manuals Performing System Operation Tasks