MPE/iX Commands Reference Manual (32650-90877)

516 Chapter12
Command List X
Commands SAVE thru SHUTQ
backward compatibility is maintained through five default workgroups
created by the system. The scheduling characteristics of the CS_Default,
DS_Default, and ES_Default workgroups mimic those of the CS, DS, and ES
scheduling subqueues. In fact, the information displayed for the CS, DS, and
ES scheduling subqueues is the same information as that for the default
workgroups.
Please refer to the NEWWG and SHOWWG commands for more detail.
Since SHOWQ displays limited information regarding workgroup processes,
Workload Manager users should use the SHOWWG and SHOWPROC commands
rather than SHOWQ. Non-Workload Manager users may choose to use these
commands if they prefer the format for viewing the default workgroups.
Example
To display the active processes and the current scheduling subqueue characteristics, enter:
:SHOWQ;ACTIVE
DORMANT RUNNING
Q PIN JOBNUM Q PIN JOBNUM
C M163 #S263
C U215 #S256
QUANTUM
QUEUE BASE LIMIT MIN MAX ACTUAL BOOST TIMESLICE
- - - - - -
CQ 152 200 1 2000 200 DECAY 200
DQ 202 238 2000 2000 2000 OSC 200
EQ 240 253 2000 2000 2000 DECAY 200
Related Information
Commands TUNE, ALTPROC, SHOWPROC, NEWWG, ALTWG, PURGEWG, SHOWWG
Manuals MPE/iX Intrinsics Reference Manual
Performing System Management Tasks
SHOWTIME
Prints current time and date. (Native Mode)
Syntax
SHOWTIME
Parameters
None.