Legato NetWorker ClientPak and Storage Node Installation Guide

55
Chapter 4: Enabling Networker
4
• If you installed the NetWorker server software for evaluation purposes, you have
30 days to use the software before you must purchase and enter an enabler code.
– You do not need to enter any evaluation enabler codes to evaluate any of the
optional NetWorker software products within the 30-day period.
– To use the NetWorker software and options beyond the 30-day trial
evaluation, you must purchase an enabler code for the software you want to
use.
– At the end of the 30 day evaluation period, if you have not purchased and
entered an enabler code, you will be unable to continue to back up data, but
you can recover the data backed up during the evaluation period.
Important: If you move the NetWorker software from one computer to another or
change the network address of a computer after the software is installed, you will need
to obtain new authorization code(s). If you need to move your software or reconfigure
your network, first contact Legato Customer Service to obtain a Host Transfer Affidavit
to avoid an interruption in your scheduled backups.
Testing Your NetWorker Installation
You should test NetWorker on your HP 3000 to make sure that the software is installed
properly and that you can access the NetWorker server to back up, recover, archive,
and retrieve files. Refer to the Legato NetWorker User’s Guide, MPE/IX Version, for
instructions on using NetWorker to back up, recover, archive, and retrieve files.