Installing and Managing HP ARPA File Transfer Protocol Network Manager's Guide (36957-90157)

78 Appendix A
Error Messages
FTP User Messages and Errors
MESSAGE: Connection time-out value set to ! seconds.
FTPINFO 49 CAUSE: User entered "TIMEOUT [num-secs]"
ACTION: If num-secs was specified, the connection time-out value was
set. Otherwise, the current value was simply displayed.
Note: a value of 0 indicates no time-outs.
MESSAGE: Store unique mode on.
FTPINFO 50 CAUSE: The FTP sunique command was entered when store-unique
was disabled.
ACTION: Subsequent put commands will guarantee that the file will be
created with a unique name on the remote machine.
MESSAGE: Store unique mode off.
FTPINFO 51 CAUSE: The FTP sunique command was entered when store-unique
was enabled.
ACTION: None.
MESSAGE: Receive unique mode on.
FTPINFO 52 CAUSE: The FTP runique command was entered when receive-unique
was disabled.
ACTION: Subsequent get commands will guarantee that the file will be
created with a unique name on the local machine.
MESSAGE: Receive unique mode off.
FTPINFO 53 CAUSE: The FTP runique command was entered when receive-unique
was enabled.
ACTION: None.
MESSAGE: Command tracing on.
FTPINFO 54 CAUSE: The FTP trace command was entered when command tracing
was disabled.
ACTION: When an FTP connection to a remote system is established,
TCP tracing will be turned on. If a connection already exists, tracing
will be turned on now.
MESSAGE: Command tracing off.
FTPINFO 55 CAUSE: The FTP trace command was entered when command tracing
was enabled.
ACTION: If an FTP connection exists to a remote system and tracing is
enabled, it will be turned off.
MESSAGE: Data tracing on.
FTPINFO 56 CAUSE: The FTP trace command was entered when data tracing was
disabled.