HP SNMP/XL User's Guide (36922-90036)

32 Chapter3
Using SNMPUTIL
SNMPCONTROL User Defined Command
SNMPCONTROL HELP
The SNMPCONTROL HELP command enters the HP SNMP/XL online help
facility. Once inside the online help facility, you can access help
information on the HP SNMP/XL subsystem. The help facility is
identical to the MPE/iX help subsystem.
SNMPCONTROL HELP
Parameters
None.
Description
This command provides an online help facility for the HP SNMP/XL
subsystem.
Example
MPEXL: snmpcontrol help
Welcome to the HP SNMP/XL HELP Facility
The HP SNMP/XL Help Facility has the same syntax and usage as the MPE/iX HELP
Facility. To receive help on either a SNMPCONTROL command, or one of the
other SNMP commands (e.g., SNMPGET, SNMPNEXT), enter the command, or the
option for the SNMPCONTROL command. You may also enter an optional help
parameter indicating the category of help you wish to review. Help is also
available for various HP SNMP/XL errors, warnings, and informational messages
that are returned to the user. You can get help on a SNMP/XL error, warning,
or informational message by entering the following type of command:
help SNMPERRxxxx
Other parameters available on most help commands are:
ALL: Explains everything about the command.
PARMS: Explains parameter(s) for the command.
EXAMPLES: Typical uses of that command.>
KEYWORDS: COMMAND,SYNTAX,AVAIL
MPEXL:
SNMPCONTROL START
The SNMPCONTROL START command allows you to start the HP
SNMP/XL subsystem.
SNMPCONTROL START
[;TRACE]
[;TFILESIZE=file_size]
[;TFILE=file_name]
[;OVERRIDE]
[;SYSFAIL]