HP SNMP/XL User's Guide (36922-90036)

23
2 Configuring HP SNMP/XL
SNMP/XL requires no configuration; however it provides a mechanism
of configuring several parameters including: system contact, system
location, and IP destination addresses of the Network Management
Station(s) configured to receive traps.
To configure SNMP/XL, you must modify a special configuration file
using any standard ASCII editor. If you want to modify the default
logging configuration for SNMP/XL, you must use the NMMGR
configuration utility. This chapter includes information of the following
topics:
• SNMPSAMP and SNMPCONF.
• The HOSTS file.
• Modifying the SNMP/XL logging configuration.