HP-PB 100Base-T Network Adapter Installation and Service Guide (B5427-90001)

11
In This Book
This book is the installation and service manual for the HP-PB
100Base-T Network Adapter that connects an HP 3000 computer using
the HP-PB backplane to a 100Base-T network.
The installation procedure section contains the installation instructions.
It explains in detail the steps necessary to install the adapter into your
computer.
The service information section defines the steps and procedures to
follow if you experience trouble with the adapter. It explains diagnostics
to be used for troubleshooting, removal/replacement instructions,
reshipment guidelines, and technical specifications.
NOTE This manual is limited to installation of the HP-PB 100Base-T Network
Adapter only. It is assumed network hubs and cabling are in place and
the appropriate HP-PB 100Base-T network software and operating
system have already been installed on the computer.