HP Pascal/iX Programmer's Guide (31502-90023)

A-: 29
HP Pascal/iX Reference Manual .
Figure A-1 shows how a source program (in a textfile ) becomes a
running program on MPE/iX.
Figure A-1. How Source Code Becomes a Running Program on MPE/iX
This section explains:
* The MPE/iX command files that perform the steps shown in Figure
A-1 .
* How to run the HP Pascal compiler with the MPE/iX command :RUN
PASCALXL.PUB.SYS.
* How to pass run-time parameters to your program.
Command Files
Table A-10 shows the MPE/iX command files that you can use to perform
the steps shown in Figure A-1 . Each command or command file in the