HP e3000/iX Network Planning and Configuration Guide (36922-90037)

Chapter 5 85
Introductory Screens
To Begin the Configuration Process
To Select NS Configuration
To Select NS Configuration. The Main screen (#2) in Figure 5-3 is
displayed after you create or open a configuration file by pressing the
[Open Config] key from the Open Configuration Directory File screen
(#1) in Figure 5-2.
Figure 5-3 Main Screen
NOTE NS/SNA is no longer offered as a product and has been removed from
the Corporate Price List. The product is obsolete with no plans for
support.
Step 1. Ensure that the information in the fields on this screen is correct. If not,
or if the information has not been entered, specify the correct
information and press the
[Save Data] key. (See Configuring Systems for
Terminals, Printers, and Other Serial Devices for information about
configuring the information on this screen.)
Step 2. When you are satisfied with the information as configured, press the
[NS] key to select the NS configuration branch.
Fields Local node
name The local node name is the name by which the HP 3000
Series 900 computer is known in the network. The
format of a node name is
nodename.domain.organization where the total
number of characters is 50 or fewer, and each field