HP e3000/iX Network Planning and Configuration Guide (36922-90037)

157

10 Validating Network Transport and

Cross-Validating with SYSGEN

This chapter discusses the validation of the network transport

conﬁguration and cross-validation of NMCONFIG.PUB.SYS with the

system conﬁguration ﬁles within SYSGEN.

Validating the network transport. This step checks data consistency

between values entered on different NMMGR data entry screens.

Cross-Validating with SYSGEN.

Cross-validation ensures that there are no conﬂicts in the use of node

names, device classes, and physical paths.