HP e3000 MPE/iX Release 6.0 System Software Maintenance Manual (30216-90272)
Table Of Contents
- Preface
- 1 Introduction
- 2 Task Checklists
- 3 Planning for Your Task
- 4 Preparing Your System
- 5 Modifying Your System
- 6 Finishing the Process
- A Manually Installed Products
- B Configuration Tables
- C Managing Disk Space
- D Backdating Your System
- E CD-ROM Resources
- F HP Patch/iX Reference
- G HP Stage/iX Reference
- H Error Messages and Warnings
- A
9
Preface
This manual describes how to install, update, add-on purchased subsystems, or apply
patches to Release 6.0 of the MPE/iX Operating System using either tape or CD-ROM
source media.
It is an update to the following manual from release 5.5:
• HP 3000 MPE/iX System Software Maintenance Manual Release 5.5
This document replaces the following three manuals from release 5.0:
• HP 3000 MPE/iX Installation, Update, and Add-On Manual MPE/iX Release 5.0
(General)
• Using CD-ROM to Update Your HP 3000 System Software
• HP 3000 MPE/iX PowerPatch Installation Manual MPE/iX Release 5.0 (C.50.02)
This manual is written for experienced MPE/iX system managers. In writing this book we
assume that you are familiar with day-to-day system management tasks such as
configuring the system, managing system resources, developing and following backup
procedures, resolving system problems, and supporting system users.