HP e3000 MPE/iX Release 6.0 System Software Maintenance Manual (30216-90272)

440 AppendixH
Error Messages and Warnings
Stage/iX Messages (STAGEMAN)
Action Contact your Hewlett-Packard Response Center for
assistance.
1144 Message Failed to convert date with ALMANAC. (STAGEMAN
1147)
Cause STAGEMAN received a bad status from the ALMANAC
intrinsic while attempting to convert the date and time
stamp for output.
Action Contact your Hewlett-Packard Response Center for
assistance.
1145 Message Failed to open the LIF Directory. (STAGEMAN
1148)
Cause STAGEMAN received a bad status from the file system
while attempting to open the system LIF Directory file,
LIFDIREC.MPEXL.SYS. The reason why the open call
failed should appear in a file system error message
preceding this one.
Action Determine why the open call failed, correct the problem,
then re-execute the command (or restart the Patch/iX
process).
1146 Message 1149 not used.
1147 Message Failed to alter the security on file “ name ”.
FALTSEC status =
value (STAGEMAN 1150)
Cause STAGEMAN received a bad status from an internal
routine while trying to add or remove write/purge
protection security on the file.
Action Contact your Hewlett-Packard Response Center for
assistance.
Message 1151-1159 not used.
1160 Message Failed to get file information for file “
name ”.
FLABELINFO error code = (STAGEMAN 1160)
Cause STAGEMAN received a bad status from the
FLABLEINFO intrinsic while attempting to get file
information on the file.
Action Contact your Hewlett-Packard Response Center for
assistance.
Message 1161-1169 not used.
1170 Message The HP Stage/iX Globals file is temporarily in
use
by another process. Can't complete command.
(STAGEMAN 1170)
Cause STAGEMAN was attempting to open the HP Stage/iX