HP e3000 MPE/iX Release 6.0 System Software Maintenance Manual (30216-90272)
Table Of Contents
- Preface
- 1 Introduction
- 2 Task Checklists
- 3 Planning for Your Task
- 4 Preparing Your System
- 5 Modifying Your System
- 6 Finishing the Process
- A Manually Installed Products
- B Configuration Tables
- C Managing Disk Space
- D Backdating Your System
- E CD-ROM Resources
- F HP Patch/iX Reference
- G HP Stage/iX Reference
- H Error Messages and Warnings
- A
Appendix H 439
Error Messages and Warnings
Stage/iX Messages (STAGEMAN)
Action Contact your Hewlett-Packard Response Center for
assistance.
1139 Message Failed to get the sector address of file “
name
”.
(STAGEMAN 1142)
Cause STAGEMAN received a bad status from an internal
routine while attempting to get the sector address of the
file (this address is needed for placing an entry for the file
in the system LIF Directory so that the file is accessible
from the ISL prompt).
Action Contact your Hewlett-Packard Response Center for
assistance.
1140 Message Got a bad sector address on file “
name
”.
Address =
value
(STAGEMAN 1143)
Cause STAGEMAN got a sector address on the file that was less
than or equal to zero (this address is needed for placing an
entry for the file in the system LIF Directory so that the
file is accessible from the ISL prompt).
Action Contact your Hewlett-Packard Response Center for
assistance.
1141 Message File “
name
” has a zero EOF.
Can't place in bootable file directory (LIF). (STAGEMAN 1144)
Cause STAGEMAN attempted to place the file in the system LIF
Directory (so that the file is accessible from the ISL
prompt), but the file is empty.
Action Contact your Hewlett-Packard Response Center for
assistance.
1142 Message File “
name
” is not contiguous. Can't
place in bootable file directory (LIF). (STAGEMAN 1145)
Cause STAGEMAN attempted to place an entry for the file in the
system LIF Directory (so that the file is accessible from
the ISL prompt), but the file on disk is not contained
within a single extent. Since ISL can only handle
single-extent files, this is an error.
Action If possible, determine how the file ended up a multiple
extent file (the number of extents can be displayed with
the LISTF[ILE] ,2 command). To fix the problem, you can
re-stage the file with STAGEFILE ;DISK=CONTIG (do an
Expert Mode HELP on STAGEFILE for more
information).
1143 Message Got a bad date string: “
name
”. (STAGEMAN 1146)
Cause STAGEMAN encountered an internal error in trying to
convert the date and time data for output.