HP e3000 MPE/iX Release 6.0 System Software Maintenance Manual (30216-90272)
Table Of Contents
- Preface
- 1 Introduction
- 2 Task Checklists
- 3 Planning for Your Task
- 4 Preparing Your System
- 5 Modifying Your System
- 6 Finishing the Process
- A Manually Installed Products
- B Configuration Tables
- C Managing Disk Space
- D Backdating Your System
- E CD-ROM Resources
- F HP Patch/iX Reference
- G HP Stage/iX Reference
- H Error Messages and Warnings
- A
330 AppendixH
Error Messages and Warnings
SETUP Error Messages (SETERR)
SETUP will terminate. Follow the instructions in
your installation
manual to continue. (SETERR #26)
Cause SETUP.INSTUTIL failed when attempting to set a file
equation for OLDACCTS.
Action • Do a LISTEQ to determine which file equations have
been set.
• Reset the files for which you no longer need file
equations. (If no file equations are needed, do a RESET
@.)
• Contact the Response Center if further assistance is
required.
27 Message SETUP could not purge its old error log SETUPLOG.
SETUP will
terminate. Follow the instructions in your
installation manual to
continue. (SETERR #27)
Cause A SETUPLOG existed from a previous execution of
SETUP.INSTUTIL, and it could not be purged.
Action • Ensure that the file is not busy.
• Ensure that the file is not a temporary file.
• Purge the SETUPLOG.
• Execute SETUP.INSTUTIL.
• Contact the Response Center if further assistance is
required.
28 Message Unable to set file equation for log file,
SETUPLOG.
SETUP will terminate. Follow the instructions in
your installation manual to continue. (SETERR
#28)
Cause SETUP.INSTUTIL failed when attempting to set a file
equation for SETUPLOG.
Action • Do a LISTEQ to determine which file equations have
been set.
• Reset the files for which you no longer need file
equations. (If no file equations are needed, do a RESET
@.)
• Contact the Response Center if further assistance is
required.
29 Message SETUP could not purge its old data file,
INITCIVR.