HP e3000 MPE/iX Release 6.0 System Software Maintenance Manual (30216-90272)
Table Of Contents
- Preface
- 1 Introduction
- 2 Task Checklists
- 3 Planning for Your Task
- 4 Preparing Your System
- 5 Modifying Your System
- 6 Finishing the Process
- A Manually Installed Products
- B Configuration Tables
- C Managing Disk Space
- D Backdating Your System
- E CD-ROM Resources
- F HP Patch/iX Reference
- G HP Stage/iX Reference
- H Error Messages and Warnings
- A
Chapter 2 31
Task Checklists
Checklist D. Add-on with Tape
Checklist D. Add-on with Tape
Use this task checklist if your source material is on tape and you are using a CSLT tape
to:
• Add-on purchased products.
NOTE
• If you are adding-on purchased products and applying PowerPatch
patches, or PowerPatch and Reactive patches, instead use Checklist E,
“Add-on with Tape and Manage Patches.”
• If you are adding-on purchased products and applying Reactive patches:
a. Perform the activities in this checklist D.
b. Then perform the activities in Checklist A, “Manage Patches,” or
Checklist B, “Manage Patches by Staging Area.”
Print a copy of this checklist for each system that you are applying add-on products to.
Read and perform the steps only in the following sections:
Begin Preparation Tasks.
Does not require exclusive access to the system.
Chapter 3 , “Planning for Your Task.”
— 3.1 Verifying Required Materials
— 3.2 General Planning Tasks
— 3.4 Checking Tape Media
— 3.6 Estimating Disk Space
Record contiguous disk space:
Record non-contiguous disk space:
Chapter 4 , “Preparing Your System.”
— 4.1 Reserving Disk Space for Tape Tasks
Preparation Tasks completed.
Schedule downtime for exclusive access.
Begin Exclusive Access Tasks.
Chapter 5 , “Modifying Your System.”
— 5.1 Securing and Backing Up the System for Tape Tasks
Record terminated logging processes:
Record system files with lockwords: