HP e3000 MPE/iX Release 6.0 System Software Maintenance Manual (30216-90272)
Table Of Contents
- Preface
- 1 Introduction
- 2 Task Checklists
- 3 Planning for Your Task
- 4 Preparing Your System
- 5 Modifying Your System
- 6 Finishing the Process
- A Manually Installed Products
- B Configuration Tables
- C Managing Disk Space
- D Backdating Your System
- E CD-ROM Resources
- F HP Patch/iX Reference
- G HP Stage/iX Reference
- H Error Messages and Warnings
- A
26 Chapter2
Task Checklists
Checklist A. Manage Patches
not required; proceed to 5.17, “Rerunning HP Patch/iX.”
If the installer utility created a CSLT/
STORE
tape combined, perform
the steps in this section.
— 5.14 Restarting the System
If the installer utility created a STORE tape only, this section is
not required; proceed to 5.17, “Rerunning HP Patch/iX.”
If the installer utility created a CSLT/STORE tape combined, perform
the steps in this section.
— 5.17 Rerunning HP Patch/iX
Chapter 6 , “Finishing the Process.”
— 6.1 Configuring Datacomm and UPS
— 6.4 Setting Passwords, Lockwords, and UDCs
— 6.7 Performing the Final Reboot
— 6.8 Restarting Selected System Functions
— 6.9 Backing Up Your System
— 6.11 Finishing Up
Checklist A tasks completed.
Record system change:
System name:
System type:
Date change made:
Change performed by:
OS version from:
OS version to:
Comments: