HP e3000 MPE/iX Release 6.0 System Software Maintenance Manual (30216-90272)
Table Of Contents
- Preface
- 1 Introduction
- 2 Task Checklists
- 3 Planning for Your Task
- 4 Preparing Your System
- 5 Modifying Your System
- 6 Finishing the Process
- A Manually Installed Products
- B Configuration Tables
- C Managing Disk Space
- D Backdating Your System
- E CD-ROM Resources
- F HP Patch/iX Reference
- G HP Stage/iX Reference
- H Error Messages and Warnings
- A
172 AppendixA
Manually Installed Products
Installing SNA IMF/iX
Installing SNA IMF/iX
Follow the steps below using the TTSINST command file to complete the installation of
SNA IMF/iX (HP30293). You can also access the online instructions by typing
TTSINST.PUB.SYS at the colon prompt without specifying any parameters.
To install the English language option for the United States and European sites:
1. Type the following commands:
:HELLO MANAGER.SYS;HIPRI
:TTSINST 000
2. Confirm that you want to complete the installation:
SNA IMF> Begin installing the English option (Y/N)? Y
SNA IMF> The English language option is now installed.
To install the Asian Language Option:
1. Type the following commands:
:HELLO MANAGER.SYS;HIPRI
:TTSINST
2. Read the instructions that appear on your screen, then enter the following:
:TTSINST 221
221 is the language option parameter
3. Confirm that you want to complete the installation:
SNA IMF> Begin installing the Japanese option (Y/N)? Y
SNA IMF> The Japanese language option is now installed.