HP Data Entry and Forms Management System (VPLUS) Reference Manual (32209-90024)

Appendix B 503
VPLUS Error Messages
FORMSPEC Error Messages
808
Error in VGETBUF. (COM’STATUS
!!!!)
809
Error writing source to forms
file. File full? (FSERR !!!!)
See error 123.
811
Internal error reading form
record for form !. (FSERR !!!)
See error 123.
812
Internal error reading globals
record. (FSERR !!!!)
See error 123.
813
Internal error allocating
GLOB’SCREEN for form !.
814
Internal error allocating STBL
for form !.
815
NEXT is not meaningful until a
forms file name is specified.
Enter a forms file name on the FORMS FILE
menu. (Exit if necessary and run FORMSPEC
again to display the menu.)
816
NEXT is not appropriate, since
there are no more forms.
Use PREV or PREV FORM key, or go to the
MAIN menu to request a particular form.
817
The save field could not found.
820
The PREV FORM key is not
appropriate; there are no
previous forms.
Use NEXT or NEXT FORM key, or go to the
MAIN menu to request a particular form.
821
Internal error allocating the
globals buffer.
822
This value is required and cannot
be blank.
823
Enter "Y" to go to function key
labels menu.
To define global function key labels, enter "Y"
on the last line of the GLOBALS menu. To
define form function key labels, enter "Y" on
the Function Key Label line of the FORM
menu.
824
Pause interval may not be
negative.
The Split Message Pause must be between 1
and 99.
825
Invalid error light
(A ... P, @@).
Enter a valid error light (a letter of the
alphabet or the @@ character).
826
Invalid Multifunction reader
definition (MARKS or HOLES).
Enter either of the valid Multifunction reader
definitions.
827
Field may only have the values
"YES" or "NO".
The valid options for Corner Cut Required are
YES or NO.
828
Illegal combination of options
for the Multifunction reader.
The combinations HOLES with Clock On and
MARKS with NONE are not valid.
Error Messages Cause/Action