Configuring Systems for Terminals, Printers, and Other Serial Devices (32022-90051)

96 Chapter6

Conﬁguring Serial Devices (for PC-Based Management)

Modify the Network Management Conﬁguration File

Step 3: Conﬁgure the Local Node Name

The Main screen is displayed (Figure 6-2). This screen lets you specify

the HP 3000’s node name. It also asks whether you are using the

HP 3000 or an OpenView Windows Workstation to manage the DTCs,

and if you are using X.25 or PAD.

Figure 6-2 Main Screen

1. Assign a node name to the HP 3000 Make sure this node name is the

same as the one you speciﬁed for this computer in the OpenView

DTC Manager.

2. Enter Y to the question, “Are you using the OpenView DTC

Manager?.”

3. If you have PAD or X.25, enter Y to the question, “Do you have

X.25 system-to-system or PAD connections?.”

4. Press the

[Save Data] key.

5. Press the

[DTS] key.