Configuring Systems for Terminals, Printers, and Other Serial Devices (32022-90051)

80 Chapter5
Configuring Serial Devices (for Host-Based Management)
Modify the Network Management Configuration File
Step 5: Select DTC Type
The DTC Configuration Selection screen (Figure 5-4) is displayed when
you press the
[Go To DTC] key at the Host Configuration screen. Here
you specify the type of DTC to configure. You can also trigger the
process to automatically add and configure a new DTC without needing
to specify detailed configuration information. See Chapter 3,
“Automatic Configuration of DTCs,” for instructions on triggering the
automatic configuration process.
Figure 5-4 DTC Configuration Selection Screen
HP 3000 Systems Slot Number
920, 922, 935, 932, 935, or 949 with HPIB 4.3
920, 925, 935, or 949 with ALINK 4.2
9X7 56
9X8 56/56
930 8.4
950, 955, 960, 980 2/4.2
990/992, 991/995 0/40