Configuring Systems for Terminals, Printers, and Other Serial Devices (32022-90051)

Chapter 2 43
Before Configuring Terminal and Printer Connections
Configuration Worksheets
HP 3000 DTC Configuration Worksheet
Fill out worksheet as shown in Figure 2-4 with configuration
information as needed.
Figure 2-4 DTS Configuration Worksheet
HP 3000 DTS Configuration Worksheet
Local HP 3000 node name [node.domain.organization] : ___________________________
Link HP 3000 (default — DTSLINK): __________________________________________
Physical path of LANIC (LANIC slot #): ________________________________________
The following fields used in PC-Based Management only
Number of non-nailed terminals: _____________________________________________
Starting ldev number: ______________________________________________________
Non-nailed terminal profile name: ____________________________________________
Number of non-nailed PAD terminals: _________________________________________
Starting ldev number: _____________________________________________________
Non-nailed terminal profile name: ____________________________________________
NOTE: These are the number of non-nailed terminals and non-nailed PAD
terminals that can logon to the computer at one time. Non-nailed devices
do not have ldev assigned to them, and use a ldev from a pool of
available ldevs for their session. Non-nailed devices are only supported
in PC-based management.