Configuring Systems for Terminals, Printers, and Other Serial Devices (32022-90051)

Appendix A 205
Using NMMGR in Maintenance Mode
Maintenance Mode Commands
COMPRESSCONF
CARDCONF cardno Compresses or
expands the current
configuration file.
CONTINUE
CONTINUE [ON or OFF] Prevents NMMGR
from terminating in
a job because of a
maintenance mode
error.
COPYCONF
COPYCONF srcpath[:srcfile][,[destpath][:destfle]][;KEEP][;NOVERS]
Copies a
configuration
subtree
DELETECONF
DELETECONF path Deletes a subtree
from the current
configuration file.
DELETENODE
DELETENODE [nodename] [:LOCAL]
[:GLOBAL]
Deletes an entry
from the network
directory.
DTSDYNCONF
DTSDYNCONF [ON or OFF or PERMOFF] Control the display
of the dynamic
configuration
question and
execution of
DTCCNTRL when
DTS validation is
complete.
DTSXVAL
DTSXVAL [ON or OFF] Enable or suppress
automatic
cross-validation
with SYSGEN.
EXIT
EXIT Exits from
maintenance mode.
EXITVALIDATE
EXITVALIDATE subsystem [ON or OFF] Validates a
subsystem’s
configuration, if
needed, when
exiting from
NMMGR.
EXITWARN
EXITWARN subsystem [ON or OFF] Warns the user that
a subsystem needs
to be validated
before exiting
NMMGR.
EXPANDDIR
EXPANDDIR numrecs Increases the
capacity of a
network directory
file.
Command Syntax Action