Configuring Systems for Terminals, Printers, and Other Serial Devices (32022-90051)

Chapter 7 139
Terminal and Printer Profiles
PAD Terminal Profile (Host-Based)
PAD Terminal Profile (Host-Based)
The PAD Terminal Profile screen, as shown in Figure 7-8 is used to
define the characteristics associated with a PAD terminal profile. Note
that this screen is used for host-based management only. For PC-based
management, you should use the regular PC-Based Terminal Profile
screen shown in Figure 7-4 for PAD terminals.
Figure 7-8 PAD Terminal Profile Screen (Host-Based)
Review the profile settings on the screen. Use the
[Tab] key to move
from field to field. Make changes as needed by typing over the current
values. When you have made the desired changes, press the
[Save Data]
key. Refer to the “Fields” subsection for detailed information about each
field on the screen.
Press the
[Prior Screen] key to return to the Profile Selection screen.
Compute Byte When this key is pressed, NMMGR will display a decimal value that is
calculated from the value of some of the fields on the PAD Terminal
Profile screen. This value describes certain parameters of the
connection between a PAD and the X.25 card in the DTC. See the
Configuring and Managing Host-Based X.25 Links manual for more
detail on the contents and purpose of the compute byte value.