Configuring Systems for Terminals, Printers, and Other Serial Devices (32022-90051)

Chapter 7 129
Terminal and Printer Profiles
Terminal Profile Screen (PC-Based)
Terminal Profile Screen (PC-Based)
Figure 7-4 shows a Terminal Profile screen for PC-based management.
Note that you only need to configure a terminal profile for nailed
terminals if you are using PC-based management. Nailed terminals are
ports with permanent ldevs assigned to them and can be accessed
programmatically.
Figure 7-4 Terminal Profile Screen (PC-Based)
NOTE The Terminal Profile screen used for PC-based management contains a
subset of the fields used by host-based management (Figure 7-2). Refer
to the previous subsection for an explanation of the fields.
The reason PC-based terminal profiles contain fewer fields is that most
terminal characteristics are defined in the OpenView DTC Manager (on
the PC).